Soft pack supercapacitor

Product introduction:

           The invention relates to a soft packed supercapacitor, which comprises an aluminum plastic film, an electrode diaphragm composite layer wrapped by the aluminum plastic film and an electrolyte; Wherein, the electrode diaphragm composite layer comprises a layer of diaphragm, a layer of electrode sheets, two layers of diaphragm, two layers of electrode sheets and three layers of diaphragm stacked in turn, and the electrode diaphragm composite layer is set as a continuous Z-shaped folded structure; The soft packed supercapacitor also comprises two electrode lugs, which are respectively connected with the first layer electrode sheet and the second layer electrode sheet. Soft pack supercapacitor Soft pack polymer battery manufacturers are widely used in electric energy storage, UPS energy storage, energy saving and consumption reduction. Soft pack supercapacitor has 3.2V, 4.2V, etc.

Series Specification Sheet:

Dimensions (unit: mm)

Product application scope:

RAM, detonator, automobile recorder, intelligent instrument, vacuum switch, digital camera, motor drive, intelligent three meter, UPS, security equipment, communication equipment, flashlight, water meter, gas meter, taillight, small household appliances

Testing method:

   1. Electrostatic capacity test method:

(1) Test principle

The test of the electrostatic capacity of the supercapacitor is to use the method of constant current discharge of the capacitor, and calculate it according to the formula.

   C=It(U1-U2)

In the formula: C - electrostatic capacity, F;

I-constant discharge current, A;

U1, U2 - use voltage, V;

T-Discharge time required for U1 to U2, S

(2), Test procedure

Charge the capacitor with a current of 100A, charge the capacitor to the working voltage and keep the voltage constant for 10 seconds, then discharge the capacitor with a current of 100A, take U1 as 1.2V and U2 as 1.0V, record the discharge time within this voltage range, and the total cycle Capacitance, take the average value.

2. Stored energy test

(1) Test principle:

The test of supercapacitor energy is carried out by the method of discharging the capacitor with constant power to 1/2 of the working voltage with the given voltage range of the capacitor. The output energy W of the capacitor is obtained from the relationship between the constant discharge power P and the discharge time T, namely:

          W=P.T

(2) Test procedure

Charge the capacitor to the working voltage with a constant current of 100A, and then keep it constant until the charging current drops to the specified current (10A for traction type, 1A for start-up type), after 5 seconds of rest, discharge the capacitor with constant power to 1/2 of the working voltage, record Discharge time and calculate magnitude. Repeat the measurement 3 times and take the average value.

3. Equivalent series resistance test (DC)

(1) Test principle

The internal resistance of the capacitor is measured according to the sudden change of the voltage within 10 milliseconds of the capacitor disconnecting the constant current charging circuit. That is: in the formula:

R - the internal resistance of the capacitor;

U0 - capacitor cut off the voltage before charging;

Ui - cut off the voltage within 10ms after charging;

I - cut off the current before charging.

(2) Measurement process

Charge the capacitor with a constant current of 100A, disconnect the charging circuit when the charging working voltage is 80%, use a sampling machine, record the voltage change value within 10 milliseconds after the capacitor is powered off, and calculate the internal resistance, repeat 3 times, and take the average value.

4. Leakage current test

After charging the capacitor to the rated voltage with a constant current of 100A, charge the capacitor with a constant voltage for 30min at this voltage value, and then leave it open for 72h. During the first three hours, the voltage value was recorded every minute, and during the remaining time, the voltage value was recorded every ten minutes.

Calculate the self-discharge energy loss, SDLF=1-(V/VW)2, and the calculation time points are: 0.5, 1, 8, 24, 36, 72h.

Note: The voltage tester must have high input impedance to minimize the impact of discharge.