Welcome to the official website of Shenzhen Yukun Technology Co., Ltd!

Consulting phone:

135-3037-2041

(Mr.Wang)

Capacitor Module
Your current location : Home >> Products >> Double layer supercapacitor

Contact UsContact Us

Shenzhen Yukun Technology Co., Ltd

Contact: Mr. Wang

Wob: 13530372041

Tel: 0755-26607151

Email: Jim@sznovelty.cn

Web: en.szsyky.cn

Add: Fudali 302, No. 8, Shuitian Hongxing Road, Bao'an District, Shenzhen

Cylindrical capacitor

Cylindrical capacitor

  • Cname:Double layer supercapacitor
  • Views:Times
  • Release date:2023-02-09 10:51:38
  • Content
  • Features
  • Parameter

Product introduction:

        Cylindrical capacitor, which is often used to make supercapacitors, is a new type of charge storage element. Compared with ordinary batteries, it has the advantages of large capacity, supporting large current charging and discharging, long cycle life, environmental protection and non-pollution, and can provide fast energy release to meet high power demand. Therefore, it has broad application prospects in new energy, transportation, industry and other fields, and is suitable for automatic meter reading (AMR) devices GPS/GSM/ARGOS related systems, automotive devices, remote sensors, radio frequency identification systems, emergency equipment and military products. Because the field of cylindrical battery capacitor has high requirements for the sealing of the battery capacitor, the sealing of cylindrical battery capacitor is the key and difficult point of its control in the design and production process.

Series Specification Sheet:

series name

series

type name

YKY-2R7

Rated voltage VR

2.7V

surge voltage

2.85V

Capacity range

15F-100F

Operating temperature range

-40℃~+85℃

Product life

Normal temperature cycle life: 25°C, 500,000 cycles between VR and 1/2VR , capacity decay ≤30%, internal resistance change ≤4 times

High temperature endurance life: 85℃, keep VR , 1000 hours, capacity decay ≤30%, internal resistance change ≤4 times

Product performance table:

model

Voltage V

Capacity F

AC internal resistance mΩ1KHz

24h leakage current uA

Product size mm

Diameter D

length H

Pitch P

YKY-2R7-J156VYJ102.7153815612.5255
YKY-2R7-J206VYJ192.7203020012.5345
YKY-2R7-J256VYJ212.7253025016267.5
YKY-2R7-J306VYJ212.7302030016267.5
YKY-2R7-J406VYJ252.7402040018417.5
YKY-2R7-J506VYJ252.7502050018417.5
YKY-2R7-J606VYJ252.7602060018417.5
YKY-2R7-J906UYJ282.79015900224610
YKY-2R7-J107VYJ272.7100151000224210

Product Size:

Yukun Technology

10000.jpg


2.7组合2.jpg

mtw-61161013.JPG

product application:

1) Portable equipment: notebook computer, video camera, PDA, digital camera, portable DVD, etc

2) Household appliances: two-way radios, walkie talkies, electric toys, electric bicycles, emergency lighting

3) Military equipment

4) Medical treatment

5) Electric tools

2.7V500-700.jpg


对比.jpg

testing method:

capacity

1 Constant current discharge method

(1) Measurement circuit

image.png

                     Figure 1 - Constant Current Discharge Method Circuit


2 Measurement method

◎ The DC voltage of the constant current/constant voltage source is set to the rated voltage (UR ) .

◎ Set the constant current value of the constant current charging and discharging device specified in Table 1.

◎ Switch the switch S to the DC power supply, and charge it with constant voltage for 30 minutes after the constant current/constant voltage source reaches the rated voltage.

◎ After charging, switch the switch S to a constant current discharge device to discharge with a constant current.

◎ Measure the time t1 and t2 of the voltage across the capacitor from U1 to U2, as shown in Figure 2, and calculate the capacitance value according to the following equation : 

image.png

Figure 2 Terminal voltage characteristics of capacitors

image.png

in

C capacity (F);

I discharge current (A);

U1  measures the initial voltage (V) ;

U 2  measures the termination voltage (V);

t 1  Time (s) for the discharge voltage to reach U1;

t 2   Time (s) for the discharge voltage to reach U2.

See Table 1 for the discharge current I and the voltages U1 and U2 at which the discharge voltage drops .

                           

3 Equipment: A, ARBIN supercapacitor test system B, linear DC stabilized power supply C, constant current discharge device D, voltage recorder

Internal resistance

Test method: AC impedance method

Measurement circuit

The measurement circuit shown is tested.

image.png

           Figure 3 - AC Impedance Method Circuit

Measurement methods

The internal resistance Ra of the capacitor should be calculated by the following formula:

image.png

in

Ra AC internal resistance (Ω);

U RMS value of AC voltage (V rms);

I AC current rms value (V rms).

The frequency at which the voltage is measured, should be 1kHz.

The AC current should be 1mA to 10mA.





Recently Viewed: